In windows os, i changed mode to linkrv,change wch driver to winusb, opeocd windows version detected LinkE
In linux, im complied source but openocd not detect linke. this is log:
thinhx2@thinhx2:~/wch/openocd-wch/src$ ./openocd -f '/home/thinhx2/wch/openocd-wch/tcl/interface/wlink.cfg' -f '/home/thinhx2/wch/openocd-wch/tcl/target/wch-riscv.cfg'
Open On-Chip Debugger 0.11.0+dev-g62850cbf8-dirty (2026-04-01-02:21)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'sdi'
Warn : Transport "sdi" was already selected
sdi
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Error: open failed
it same as wch driver on windows
how i can fix it?
In windows os, i changed mode to linkrv,change wch driver to winusb, opeocd windows version detected LinkE
In linux, im complied source but openocd not detect linke. this is log:
thinhx2@thinhx2:~/wch/openocd-wch/src$ ./openocd -f '/home/thinhx2/wch/openocd-wch/tcl/interface/wlink.cfg' -f '/home/thinhx2/wch/openocd-wch/tcl/target/wch-riscv.cfg'
Open On-Chip Debugger 0.11.0+dev-g62850cbf8-dirty (2026-04-01-02:21)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'sdi'
Warn : Transport "sdi" was already selected
sdi
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Error: open failed
it same as wch driver on windows
how i can fix it?