gridworks-scada-protocol.v1.2.3

Changes

• gridworks-admin 1.2.5 - decouples from layout.lite evolution (#533) @jessicamillar
• Replace layout.lite Handshake with Control Capabilities (#532) @jessicamillar
• LC topping up storage: minimum of 3kWh missing at charge buffer afterwards (#530) @thdfw
• Add HP electrical power and turn on time to SCADA and house parameters (#529) @thdfw
• Add heat pump parameters (power and turn on time) to SCADA and house parameters (#525) @thdfw
• Make horizon_hours an explicit parameter in LTN (#528) @thdfw
• Making the horizon hours an explicit parameter (#497) @thdfw
• Add command node to turn off/on store pump commands in StorePumpDoctor (#526) @thdfw

gridworks-admin.v1.2.5

Changes

• No changes

gridworks-scada-protocol.v1.2.2

Changes

• gridworks-admin pyproject.toml has to point to updated gwsproto (#523) @jessicamillar

gridworks-admin.v1.2.4

Changes

• step 3: update the version of gridworks-admin (#524) @jessicamillar

gridworks-admin.v1.2.3

Changes

• Update layout lite and gridworks-admin version (#522) @thdfw
• Ha1Params version changed => LayoutLite version needed to change (#521) @jessicamillar
• Adding COP parameters to SCADA parameters (#520) @thdfw
• Adding COP parameters to SCADA's .env file (#519) @thdfw
• pi's use 3.12 instead of 3.11 (#518) @jessicamillar

gridworks-admin.v1.2.2

Changes

• new admin 1.2.2, new updated requirements (#517) @jessicamillar
• Larger text for admin panel (#514) @thdfw
• Upgrade stack (Python 3.12 + NumPy 2.x) and stabilize CLI behavior (#516) @jessicamillar
• Simple fuel substitution when running the FLO (#511) @thdfw
• Replace mosquitto GitHub action with native docker run to fix CI (#513) @jessicamillar
• Fixing system cold logic for when a thermostat is lowered during onpeak (#510) @thdfw
• Fixing system cold logic for when a thermostat is lowered during onpeak (#509) @thdfw
• Waiting 5min before triggering system cold event in LocalControl (#508) @thdfw
• Adding prints for buffer empty/full states (#507) @thdfw
• When not short cycling, buffer empty should look at RSWT, not RSWT-DeltaT (#506) @thdfw
• pump and store doctors as procedures; cold night hack (#505) @jessicamillar
• Jm/dist pump procedure (#504) @jessicamillar

gridworks-scada-protocol.v1.2.1

Changes

• admin v1.2.1 (#500) @jessicamillar
• Fix admin version w new layout lite (#499) @jessicamillar
• Enable short cycling the buffer in AllTanksLeafAlly if specified in SCADA's .env #496 (#498) @thdfw
• Enable short cycling the buffer in AllTanksLeafAlly if specified in SCADA's .env (#496) @thdfw
• revert ltn's monitor_only (#495) @jessicamillar
• revert ltn's monitor_only (#494) @jessicamillar

gridworks-admin.v1.2.1

Changes

• No changes

gridworks-scada-protocol.v1.2.0

Changes

• 1.2.0: No more HomeAlone or AtomicTNode (#492) @jessicamillar
• Jm/ltn: 1.2.0. HomeAlone -> LocalControl, Atn -> LeafTransactiveNode, more (#491) @jessicamillar
• set default AsyncCaptureDelta to 2W for power channels (#480) @jessicamillar
• Enable 96-hour price and weather forecasts (#488) @thdfw
• Enabling 96 hour price and weather forecasts (#487) @thdfw
• Debug case where both buffer and storage are full (#484) @thdfw
• Improve behavior where both buffer and storage are full in AtomicAlly (#486) @thdfw
• Minor error correction in previous merge (#485) @thdfw
• Update buffer depth units in ATN (#483) @thdfw

gridworks-admin.v1.2.0

Changes

• No changes