Eclipse 4diac IDE – an open-source engineering tool for IEC 61499-based distributed automation systems.

Open hardware CM_ESP_P4_C5 dev kit using Espressif ESP32-P4 SOM and ESP32-C5 module. Standard Camemake camera module pinout for vision, HMI and edge control. Full schematics, PCB, firmware, BOM and mechanical so you can build and ship your own product.

C++/Qt 多协议工业设备调试上位机：RS485 ASCII、Modbus RTU、CRC校验、报文日志、设备模板、SQLite保存和AI日志诊断

STM32F103ZE industrial data acquisition and RS485/CAN gateway project with StdPeriph and FreeRTOS-ready architecture.

Heap-free C99 single-header permissive/interlock evaluator with deny mask, first-out detection, qualifier times, latching, and maintenance bypass for embedded firmware.

Educational and practical V–I control ASIC using PID + FSM on SKY130 with OpenLane

Academic framework for Project Laplace: A Deterministic Verification Architecture (ADOA) resolving LLM hallucinations in Cyber-Physical Systems (CPS).

Compact open-hardware I/O system with 4 analog inputs, 4 digital inputs, 4 analog outputs, and 4 relay outputs for industrial automation and Arduino.

🔗 Interface industrial sensors using 4–20 mA current loops with the PIC32CM PL10 microcontroller for robust, low-power control in automation systems.

Security platform for OT/ICS environments, network visibility, behavioral threat detection, post-quantum signed evidence bundles, and M-of-N quorum enforcement for high-impact commands.

This example, developed on PIC32CM-PL10 CNano, highlights use of MVIO feature in the PIC32CM-PL10 family and 5V operation of MCUs for industrial applications that involve analog sensors operating at a different voltage than 4-20mA current loop transmitter